Tell us about your project and we will get back to you within 24 hours.
Your information is secure and never shared.
The carpet runs straight down the face of each step and rolls softly over the nosing without being folded or tucked at the edge. It's a faster install and gives stairs a smooth, continuous look from top to bottom.
Each piece of carpet is cut and wrapped tightly around the nosing of its own step, so the tread and riser meet in a crisp, tailored line. It takes longer per step but gives a more finished, boxed edge that some homeowners prefer.
We check pile height, color, and texture against the carpet in your hallways and rooms before we order, so the staircase reads as one continuous floor instead of a mismatched patch between levels. The edge of every step also takes more direct foot traffic and stress than any flat run of carpet in the house, so carpet that isn't fully seated and fastened at the nosing gets extra attention during install to avoid becoming a trip hazard.
Pad and carpet choice for stairs also account for grip underfoot, since stairs see more direct impact and slip risk than a flat room.
Stairs are rarely uniform. We measure each tread, riser, and nosing individually rather than estimating from one step.
We talk through waterfall versus French cap based on your carpet's thickness, the shape of your nosing, and the look you want, then fit padding to each step individually – not rolled out like a room pad – so it supports the nosing where wear is heaviest.
Carpet is fastened at the nosing and along the back of each step so it stays tight and flat under regular use, not just on install day.
We walk the finished staircase and check every nosing and edge is fully seated, since a loose edge on a stair is a trip hazard in a way it would not be on a flat floor.
Stairs get stepped on at the same narrow point on every tread, all day, every day – a different wear pattern than an open room.
We don't tack a staircase onto the end of a room install using whatever's left over. It's planned and cut for its own space.
Your written quote covers the staircase on its own, including method, padding, and the workmanship warranty that applies to that job.
Every tread is checked at the nosing before the job is called finished, not just glanced at from the top of the stairs.
Every step lands on the same narrow strip of carpet, so the nosing takes more wear than almost any other surface in the house – which is why it gets extra attention during installation. This page covers full-width stair carpet, where the carpet runs the whole width of each tread. If you want your hardwood treads left showing on both sides, that’s a stair runner instead – a different material order, a different edge finish, and a different quote.
Because the nosing absorbs the same contact point on every pass, carpet that looks fine in a bedroom can flatten and fuzz on a staircase within a couple of years. Denser, low-pile options generally hold their texture longer at that edge than plush styles.
Waterfall carpet flows over the nosing in one smooth line with no fold at the edge, while French cap carpet is cut and wrapped tightly around each nosing for a tailored, boxed edge. Both are secured the same way underneath; the difference is mainly in the finished look and the time each step takes.
In most cases, yes. We compare pile, color, and texture against your existing carpet before ordering so the staircase blends with the hallways and rooms it connects to instead of standing out as a separate patch.
Yes. The nosing of each step takes the most direct pressure of anywhere on a staircase, and carpet that isn't properly seated there can shift or bunch underfoot. Secure fastening at the nosing on every tread is a core part of a proper stair install, not an optional extra.
It depends on the number of steps, the method chosen, and whether padding needs to be replaced. French cap takes longer per step than waterfall. We'll give you a time estimate once we've measured your stairs in person.